FAQ

Here are a few things to check:

Ensure Proper Contact: Make sure the soil is properly compressed around the Pebble. The sensor needs to make good contact with the soil (this is very important).

Wait After Watering: It can take up to an hour for the Pebble to detect that the plant has been watered.

Check Soil Moisture: If the soil is still wet, the Pebble might not detect the new water immediately. Also, if you only give a small amount of water, it might not be detected within an hour.

Manual Update Issues: When pressing the button for a manual update, ensure that you do not press the Pebble in a way that it loses contact with the soil. Make sure the Pebble is touching the soil at all times.

Soil Type: The Pebble only works with soil and will not work with hydro or clay pebbles.

Pot Size: For larger pots, it’s more important to water the soil evenly so the Pebble can accurately detect the moisture level.

Here’s what to keep in mind:

Be Patient: It takes time for nutrition to spread through the soil. Avoid adding too much at once and be patient after you’ve added nutrients.

Follow Watering Cycle: Only add nutrition during your regular watering cycle to prevent overwatering the plant.